Rubber water heater 2 l, 1 pc.

Description

Warming pad in a rubber sheath for warming body tissues. Used for local heating of body tissues and general warming of the patient.

The colour is chosen at random.

Composition: rubber.

Volume: 2 l

Dimensions: 27 x 16 cm

Conditions of use:

1. Before use, check the heater and stopper for wear and damage.
2. Wash the hotplate with warm, soapy water and rinse under running water.
3. Fill 2/3 of the container with water at a maximum temperature of 65°C. Hold the heater upright by the neck and pour the water in slowly, avoiding splashing hot water.
   ATTENTION! DO NOT USE BOILING WATER. DO NOT OVERFILL THE HEATER WITH WATER, AS THIS MAY CAUSE THE HEATER TO RUPTURE. DO NOT FILL THE HEATER WITH HOT TAP WATER, THIS MAY DAMAGE THE RUBBER OF THE HEATER.
4. Release the air from the heater by pressing it until water appears.
5. Screw the stopper on firmly.
6. Check for leaks: flip the warmer upside down, away from the body, and lightly click.
7. Drain the hotplate.
8. The warming plate must be wrapped in a durable material or towel to avoid direct skin contact.
   ATTENTION! THE HEATER CAN CAUSE BURNS. AVOID DIRECT, PROLONGED CONTACT WITH THE SKIN.
   WARNING: It is not recommended to sit or lie on the heater or place heavy objects on it.
9. To avoid pigmentation or redness (especially with continuous and prolonged use), apply a moisturiser after using the heater.
10. Care must be taken to ensure the correct positioning of the heater and to check the degree of heating of the skin frequently, as burns can occur. The degree of warmth of the skin under the heater is determined by hand.
11. After using a heating pad, pour off the water and hang it to dry with the stopper removed until completely dry.

Storage conditions: keep the heater suspended in a room with a temperature between 0 ºC and 25 ºC , away from heating installations. The heater must be free from grease, petrol or other solvents and direct sunlight.